ULTIMATE WINDSHIELD PROTECTION – LARGE 16ML

$35.99

IDEAL FOR LARGER CARS, SUV’S, TRUCKS & BOATS

LIQUIDNANO™ is the unrivaled super durable, silica dioxide (Si02) based automotive glass protective smart coating. Designed, engineered and formulated in Germany, LIQUIDNANO™ utilises the most advanced Nano-technology available today to deliver optimal windshield protection and performance.

EVERYTHING YOU NEED TO MAKE YOUR WINDSHIELD.
IMPACT, SCRATCH, WATER AND FROST RESISTANT.

  • Universal – fits any windshield
  • Easy wipe-on DIY application
  • Easy clean – repels dirt, road grime and anti bird-fouling
  • Protects against chips and scratches
  • 9h hardness – resists impact.
  • Easier removal of mud, frost, snow and ice
  • Hydrophobic – Water repellent
  • Improves wet weather visibility
  • Inhibits ocean spray and salt burn
  • Better night-time visibility – reducing glare from oncoming headlights
  • Protects headlight glass
  • Lasts up to 1 year
  • Eco-Friendly

Pack Contains:

  • 2 x Cleaner Sachets (Driver Side and Passenger Side)
  • 2 x Nano coating Sachets (Driver Side and Passenger Side)
  • 1 x Application Instructions
  • DISCLAIMER: LIQUIDNANO™ WINDSHIELD PROTECTOR should only be applied to the glass surfaces on your vehicle.  LIQUIDNANO™ was created to protect automotive glass under normal use and weather condition and as such we do not warrant product performance under negligent or extreme off-road conditions.

Only 2 left in stock

Category:

Features

  • 0%

of Ultraviolet (UV) rays blocked

  • 0%

of Infrared (IR) rays blocked

  • 0%

Visible Light Transmittance

Applications

  • Commercial glass

  • Residential glass

  • Glass manufacturing

  • Polycarbonate materials

  • Skylights

Features

  • Protects wood, upholstery & merchandise from sun damage

  • Reduces seasonal heating/cooling costs

  • Cost effective

  • Environmentally friendly

  • Easy application by custom paint roller

  • Can be applied on top of or under window film

  • Fully cures in 14 days=Zero off gassing when fully cured

Coverage

  • 1KG: 430 ft2 (37m2)

  • 20KG: 8,600 ft2 (800m2)

LIQUID NANOTINT® FAQs

The specially formulated NanoTint coating blocks up to 99.9% of ultra-violet
(UV) light and absorbs up to 85% of Infra-Red (IR) light on the window, while
still allowing for up to 80% visible light transmission.

Liquid NanoTint is a 2-component solution that, once mixed, has a pot life of 2 hours. The mixed solution is applied with a high-density foam roller. For each designated coating area the mixed solution must be applied evenly within approximately 4 minutes from start to finish. For more detailed information, please consult the application instructions for My sun Grid Liquid NanoTint.

My Sun Grid® recommends coating the interior surface of a glass. Interior
environmental conditions are more easily controlled resulting in optimum
clarity and uniformity of the final fully cured coating.

Yes, My Sun Grid® recommends application at a temperature between 41-95°F (5-35°C) and relative humidity 70% or less. Air circulation should be minimized to mitigate contamination in the form of dust and dirt during the application process and for at least the initial 60 minutes time.

Each high-density foam roller used will absorb and retain 30 grams of Liquid
NanoTint solution. In addition to these initial 30 grams, every additional 30
grams of Liquid NanoTint solution will cover an area of 1m2 (10ft2).

All obvious dirt and contaminants should be removed with a paper towel.
Masking materials should be used to protect adjacent surfaces and window
fixtures. My Sun Grid® LNT Glass Primer is then used to clean the surface.
For more detailed information, please consult the Standard Operating
Procedure for My Sun Grid Liquid NanoTint.

One person can coat approximately 2m2 (21ft2) before encountering
application challenges.

Not at this time. Consult My Sun Grid if you have another suggested process.

Similar to a household paint, there is an initial odor that lasts about 4 hours. We recommend vacating the premises during the application for a minimum of 4 hours. Once the coating has fully cured, no off gassing occurs as validated by independent third party testing. This documentation is available upon request.

As with any material being used in the workplace or home, please refer to label for safety precautions. More detailed information is provided in the My Sun Grid® Liquid NanoTint Safety Data Sheet which includes safe handling, storage, personal protective equipment, and disposal procedures.

Yes.

There is a warranty on this product. What is covered in this warranty is available upon request.

Yes, after it has fully cured for 14 days. Abrasive materials should be avoided.

Abrasion of the coating is possible. It is important to remember that the coating is only as sound as the substrate. If a material will abrade glass, it will abrade the Liquid NanoTint Coating.